RIGID SYSTEM POLYOLS |
Product Designation |
Core Density
(kg/m3) |
Compressive
Strength
kg/cm2 |
Dimensional Stability
(% linear change) |
K factor
W/m'K |
K factor
(BTU.in/ft2.hour°F) |
| Appliances |
| For use with HCFC 141B |
| EMPEYOL HSR 200/1 |
30 min |
1.12 minimum |
- 1.0 max (-30 °C/ 48 hrs) |
0.0195 max |
0.135 max |
| Prembled with HCFC 141B |
| EMPEYOL HSR 200/1 F |
32+/- 02(Forcabinet) |
1.0 minimum |
2.0 max.
cycle test - 30°C and + 60°C for 4.5 hrs each - after continious 4 cycles
(by volume) |
0.0195 max |
0.135 max |
| 34+/- 02(For door) |
| For use with CYCLOPENTANE/ISOBUTANE |
| EMPEYOL PST 200/1 |
32.0 minimum |
1.4 minimum |
<0.6(-30°C/7 days)
(by volume) |
0.02 max |
0.140 max |
| |
| General Insulation |
| Preblended with HCFC 141B |
| EMPEYOL HSR 200/2XF(Roof Spray) |
40 minimum |
2.5 minimum |
-1.0 max (-28°C/ 24 hrs) |
0.02 max |
0.140 max |
| EMPEYOL HSR 200/6XF(pipe section moulded) |
30 minimum |
1.0 minimum |
-1.0 max (-28°C/ 24 hrs) |
0.02 max |
0.140 max |
| EMPEYOL HSR 200/7XF(Panel/ Moulded block) |
32 minimum |
1.0 minimum |
-1.0 max (-28°C/ 24 hrs) |
0.02 max |
0.140 max |
| EMPEYOL HSR 200/7F(Panel/ Water Heaters)
|
36 minimum |
1.0 minimum |
-1.0 max (-28°C/ 24 hrs) |
0.02 max |
0.140 max |
| EMPEYOL HSR 200/8XF(Pipe Support & High Density)
|
150 minimum |
1.0 minimum |
-1.0 max (-28°C/ 24 hrs) |
0.02 max |
0.140 max |
| EMPEYOL HSR 200/9XF(Insulation)
|
40 minimum |
1.0 minimum |
-1.0 max (-28°C/ 24 hrs) |
0.02 max |
0.140 max |
|
HST Pack 660 (Packaging Applications) |
10 minimum |
--- |
--- |
---- |
----- |
| |
| THERMOWARE |
| EMPEYOL HST 200/11 |
30 minimum |
1.0 minimum |
-1.0 max (-28°C/ 24 hrs) |
0.02 max |
0.140 max |
